4-20mA or 0-10V to network Modbus TCP and MQTT data acquisition module WJ181
Product features:
4-20mA signal conversion to standard Modbus TCP protocol
Supports communication protocols such as TCP Server, UDP, MQTT, etc
Built in web page function, allowing data to be queried through web pages
Wide power supply range: 8~32VDC
High reliability, convenient programming, and easy application
Standard DIN35 rail installation for convenient centralized wiring
Users can set module IP addresses and other parameters on the webpage
Low cost, small volume, modular design
External dimensions: 106 mm x 59mm x 37mm
Typical applications:
Signal measurement, monitoring, and MQTT reporting
Modbus TCP network, data collection
Intelligent building control, security engineering and other application systems
Industrial automation control system based on TCP network
Industrial site signal isolation and long-distance transmission
Equipment operation monitoring, MES system
Measurement of sensor signals
Acquisition and recording of industrial site data
Development of medical and industrial control products
4-20mA or 0-5V signal acquisition
Product Overview:
The WJ181 product is an IoT and industrial Ethernet acquisition module that enables transparent data exchange between sensors and networks. Can transmit
The analog data of the sensor is forwarded to the network.
The WJ181 series products include power conditioning, analog signal acquisition, and RJ-45 network interface communication. The communication method adopts MODBUS TCP protocol. TCP
It is a transport layer based protocol that is widely used, connection oriented, and reliable. Users can directly set the module IP address and subnet mask on the webpage
Wait. Can be used for monitoring and controlling the operation of sensor equipment.
The WJ181 series products are intelligent monitoring and control systems based on microcontrollers. User set module IP addresses, subnet masks, and other configuration information are stored
Exists in non-volatile memory EEPROM.
The WJ181 series products are designed and manufactured according to industrial standards, with strong anti-interference ability and high reliability. Working temperature range -45 ℃ to+80 ℃.
Function Introduction:
The WJ181 remote I/O module can be used to measure one analog signal.
1. Analog signal input
12 bit acquisition accuracy, with one analog signal input. All signal input ranges have been calibrated before the product leaves the factory. When in use, users can also be very convenient
Convenient self programming calibration. Please refer to the product selection for the specific current or voltage input range.
2. Communication protocol
Communication interface: RJ-45 network interface. The two indicator lights at the network port position, after the network cable is plugged in, the Link light (green light) will remain on and the Data light (yellow light) will remain on.
Communication protocol: Using MODBUS TCP protocol to achieve industrial Ethernet data exchange. It can also communicate with modules through TCP sockets.
Network cache: 2K Bytes (both receive and send)
Communication response time: less than 10mS. 3. Anti-interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulses and protect the module.
Product manual：https://www.wayjun.cn/d/
English