0-10V to PWM pulse, width modulation vision light source, 4-20mA/RS485 proportional valve solenoid valve drive controller
Features:
>>Accuracy, linearity error level: 0.1,0.2
>>4-20mA / 0-5V / 0-10V and other standard signal input
>>Optional RS485 communication input, support Modbus protocol
>>PWM signal output, PWM frequency optional
>>PWM output drive capacity up to 5A
>>Signal input / signal output 3000VDC isolation
>>Can choose one into one, one into two, two into two out
>>Optional 5V, 12V, 15V or 24V DC single power supply
>>The amplitude of the PWM signal is equal to the power supply voltage
>>The auxiliary power supply is not isolated from the PWM signal
>>Fixed screw mounting, plug-in terminal block
>>Size: 120 x 105 x 29mm
>>Industrial temperature range: - 45 ~ +85 ℃
Products Listing:
DIN□□ IAP – V(A)□ – P□ – PWM□
|
Channel
|
Input Signal
|
Power Supply
|
Output Signal
|
|
DIN11: one in one out
DIN12：one in two out
DIN22：two in two out
|
V1：0-5V
V2：0-10V
V3：0-75mV
V4：0-2.5V
Vz：user-defined
A1：:0-1mA
A2：0-10mA
A3：0-20mA
A4：4-20mA
Az：user-defined
RS485：RS485 interface
|
P1:24VDC
P2:12VDC
P3:5VDC
P4:15VDC
Pz: user-defined
|
PWM1:50Hz
PWM2:100Hz
PWM3:1KHz
PWM4:10KHz
PWM5:100KHz
PWMz: user-defined
|
Samples:
1. One in one out Input signal:0-10V Power Supply:24VDC Output Signal:100Hz PWM Type No.: DIN11 IAP-V2-P1-PWM2
2. One in two out Input signal:0-10V Power Supply:12VDC Output Signal:100KHz PWM Type No.: DIN12 IAP-V2-P2-PWM5
3. One in one out Input signal:RS485 Power Supply:24VDC Output Signal: 100KHz PWM Type No.:DIN11 IAP-RS485-P1-PWM5
4. One in one out Input signal:0-10V Power Supply:12VDC Output Signal:5KHz PWM Type No.: DIN11 IAP-V2-P2-PWMz (PWMz:5KHz)
Download the Datasheet : analog or RS485 to PWM.pdf
English