4-channel grating ruler magnetic grating ruler encoder 5MHz high-speed pulse signal to RS485/232/WiFi module WJ166
Product features:
Decoding and converting grating ruler magnetic grating ruler to standard Modbus RTU protocol
High speed grating ruler magnetic grating ruler 4th harmonic counting, with a frequency of up to 5MHz
The module can output a 5V power supply to power the grating ruler
Supports simultaneous counting of 4 grating rulers, capable of recognizing forward and reverse directions
It can also be set as an 8-way independent DI high-speed counter
Encoder count value supports automatic power-off saving
1000V isolation between DI input and RS485/232 communication interface
Through the RS-485/232 interface, it is possible to reset and set the count value
WiFi supports Modbus TCP and MQTT communication protocols
Built in web page function, allowing data to be queried through web pages
Wide power supply range: 8~32VDC
Standard DIN35 rail installation for convenient centralized wiring
External dimensions: 120 mm x 70 mm x 43mm
Typical applications:
Measurement of grating ruler magnetic grating ruler length
Flow meter pulse counting or flow measurement
Counting of production line products
Measurement of CNC machine tool position data
Encoder signals are transmitted remotely to industrial computers
Replace PLC with direct data transmission to the control center
Product Overview:
The WJ166 product realizes signal acquisition between sensors and the host, which is used to decode encoder signals. The WJ166 series products can be applied to RS-232/485
And WiFi bus industrial automation control system, automated machine tools, industrial robots, three coordinate positioning system, displacement measurement, stroke measurement, angle measurement
Quantity, speed measurement, flow measurement, product counting, and so on.
The product includes signal isolation, pulse signal capture, signal conversion, and RS-485 serial communication. Each serial port can connect up to 255 WJ166 series modules,
The communication method adopts ASCII code communication protocol or MODBUS RTU communication protocol, and the baud rate can be set by the code, which can be hung with control modules from other manufacturers
On the same RS-485 bus, it is convenient for computer programming
The WJ166 series products are intelligent monitoring and control systems based on microcontrollers, with all user set addresses, baud rates, IP addresses, and parameter settings
The configuration information is stored in the non-volatile memory EEPROM.
The WJ166 series products are designed and manufactured according to industrial standards, with strong anti-interference ability and high reliability. Working temperature range -45 ℃ to+85 ℃.
Function Introduction:
The WJ166 remote I/O module can be used to measure four encoder signals, or can be set as an 8-channel independent counter or DI state measurement.
1. Signal input
4 encoder signal inputs or 8 independent counters can be connected to both dry and wet contacts. Please refer to the wiring diagram for details.
2. RS485/232 communication protocol
Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communication interface, specified when ordering and selecting.
Communication protocol: Supports two protocols, the character protocol defined by the command set and the MODBUS RTU communication protocol. The module automatically recognizes the communication protocol,
Can achieve network communication with multiple brands of PLC, RTU or computer monitoring systems.
Data format: 10 digits. 1-bit start bit, 8-bit data bit, 1-bit stop bit. No verification.
The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set; communication
The longest distance of the network can reach 1200 meters and is connected through twisted pair shielded cables.
High anti-interference design of communication interface, ± 15KV ESD protection, communication response time less than 100mS. 3. WiFi communication protocol
Communication interface: WiFi network interface. It can be connected to WiFi in the local area network and then to Ethernet.
Communication protocol: Supports MQTT protocol and can connect to various MQTT platforms such as Alibaba Cloud, Tencent Cloud, Huawei Cloud, China Mobile IoT OneNET, Private Cloud, etc
The server. MODBUS TCP protocol can also be used to achieve industrial Ethernet data exchange.
It also supports communication protocols such as TCP/UDP/WebSocket.
Network cache: 2K Bytes (both receive and send)
Communication response time: less than 10mS. 4. Anti-interference
Checksum can be set as needed. There are transient suppression diodes inside the module, which can effectively suppress various surge pulses and protect the module
Word filtering can also effectively suppress power frequency interference from the power grid.
Product manual：https://www.wayjun.cn/d/
English